Being a full-service gutter company means that we can perform a full range of gutter repairs. Our technicians are trained to spot problem areas with your current gutter system that can easily be overlooked by any homeowner.
Typically, the evaluation of your gutters is best done while the gutters are being cleaned. This way we can see what is in the gutter, how the gutter is attached to the fascia board or roof life, evaluate the downspout drainage and check the condition of the edge of the roof.
If your gutters are old, damaged, sagging, missing parts or poorly installed, then it is likely that exterior and interior damage to your home will follow. Most homeowners don’t realize how many options they have when it comes to some of the most basic gutter repairs. We have solved many major problems that a lot of homeowners have faced due to improperly working gutter system.
Below are some common problems diagnosed by our trained technicians:
Older gutters often sag because years ago contractors used big spike nails to nail the gutter through the front and back of the gutter into the fascia board. Because the metal constantly expands and contracts, over time the gutters literally pull the spikes out, weakening the whole gutter system. Unfortunately, some contractors still use those spikes instead of inside hidden gutter hangers, which should be screwed into the fascia board instead of nailed. Gutter replacement is usually necessary to correct this problem. On newer sagging gutters it is sometimes possible to install inside hidden hangers to reinforce and re-pitch them.
Storm damage, which usually occurs when falling objects, such as branches and trees, crush gutters during storms. Sometimes during rain storms, gutter spikes will push out when the gutters are full and weighed down with water. In the winter, lesser quality gutter screws can also snap under the weight of ice or snow. For safety reasons especially, corrective action should be taken as soon as possible.
They were timely and effective. I personally recommend them to anyone in need of gutter replacement or gutter repair. Thanks for the excellent work!
– Belinda Campbell
Downspouts serve the important function of moving water collected by gutters away from the foundation and should always be repaired in a timely manner. Usually just the dented or crushed section of the downspout must be replaced, which is relatedly inexpensive.
This can be the result of improperly installed gutters that don’t pitch enough so the water doesn’t flow toward the downspout. It can also be the result of sagging gutters, which were nailed to the fascia board with gutter spikes, or perhaps hidden hangers were used but they were nailed rather than screwed in. Re-pitching the gutters and reinforcing them with inside hidden hangers and proper screws can typically fix this.
After about 20 years, aluminum and copper gutters typically begin to develop pinholes due to oxidation. When it rains, water drips from gutters that appear to be in good condition. Gutter replacement is the only solution.